Installing the secondary memory module
1
Insert the memory module into the memory socket.
2
Press the clips to secure the memory module to the system board.
3
Place the memory shield in its original position on the memory module and tighten the screw to secure it to the computer.
4
Install the:
a
b
c
d
5
Follow the procedure in
After working inside your computer
.
WWAN card
Removing Wireless Wide Area Network - WWAN card
NOTE:
Depending on the configuration you choose, you may or may not have WWAN card.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the WWAN card:
a Disconnect and unroute the antenna cables connected to the WWAN card [1].
b Remove the M2.0x3.0 screw that secures the WWAN card to the computer [2].
c Remove the WWAN card from the computer [3].
Disassembly and reassembly
19
