Steps
1. Remove the three screws (M2x2) that secure the touchpad bracket to the palm-rest and keyboard assembly.
2. Peel the tape that secures the speaker cable to the touchpad bracket.
3. Open the latch, and disconnect the touchpad cable from the touchpad.
4. Peel the tape that secures the touchpad to the palm-rest and keyboard assembly.
5. Remove the two screws (M2x2) that secure the touchpad to the palm-rest and keyboard assembly.
6. Slide and lift the touchpad off the palm-rest and keyboard assembly.
Installing the touchpad
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the installation procedure.
28
Removing and installing components
