Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Using the alignment posts and rubber grommets, place the speakers on the slots of the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Adhere the tape that secures the speaker to the palm-rest and keyboard assembly.
4. Connect the speaker cable to the system board.
5. Route the I/O-board cable through the routing guides on the fan.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Removing and installing components
23
