Dell Inspiron 7420 Service Manual Download

Page: 23 / 85

Steps

1. Remove the screw (M2x2) that secures the SSD shield and remove the shield from the SSD.
2. Remove the screw (M2x2) that secures the SSD to the system board.
3. Slide and remove the solid-state drive from the M.2 slot on the system board.

NOTE:

A thermal pad is included with the SSD plate and must always be adhered to the plate. If the thermal pad gets

separated from the plate or is adhered to the SSD, stick back the thermal pad to the SSD plate before reinstalling the
plate to the SSD.

Installing the solid-state drive

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.

Removing and installing components

Summary of Contents for Inspiron 7420






















































































Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands

Dell Inspiron 7420, Service Manual

Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands