Dell Inspiron 7420, Service Manual, Page: 22 / 85

Steps
1. Connect the battery cable.
2. Align and place the base cover on the computer, and snap the base cover latches into place.
3. Tighten the eight captive screws to secure the base cover to the computer.
Next steps
1. Install the microSD card .
2.
NOTE: Plug-in AC before powering up your computer.
Follow the procedure in after working inside your computer .
Solid-state drive
Removing the solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the microSD card .
3. Enter the service mode .
4. Remove the base cover .
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
22 Removing and installing components