manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Service Manual, Page: 29 / 66

Share
Download
Dell Inspiron 7300 2n1 Black Service Manual Download Page 29

Coin-cell battery

Removing the coin-cell battery

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

base cover

.

About this task

NOTE:

 Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you

note the BIOS setup program's settings before removing the coin-cell battery.

The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal procedure.

Steps

1. Peel the tape that secures the I/O-board cable-latch to the I/O board.
2. Open the latch and disconnect the I/O-board cable from the I/O board.
3. Disconnect the coin-cell battery cable from the I/O board.
4. Peel and lift the coin-cell battery off the palm-rest assembly.

Installing the coin-cell battery

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the installation procedure.

Removing and installing components

29

Summary of Contents for Inspiron 7300 2n1 Black



































































Reviews:

No comments