manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Service Manual, Page: 25 / 66

Share
Download
Dell Inspiron 7300 2n1 Black Service Manual Download Page 25

12. Adhere the tape that secures the display-cable latch to the system board.

Next steps

1. Install the 

base cover

.

2. Follow the procedure in 

After working inside your computer

.

Fans

Removing the fan

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

base cover

.

About this task

The following image(s) indicate the location of the fan and provides a visual representation of the removal procedure.

Steps

1. Peel the tape that secures the I/O-board cable-latch to the I/O board.
2. Open the latch and disconnect the I/O-board cable from the I/O board.
3. Remove the I/O-board cable, speaker cable and antenna cables from the routing guides on the fan.
4. Disconnect the fan cable from the system board.
5. Remove the two screws (M2x2) that secure the fan to the palm-rest assembly.
6. Lift the fan off the palm-rest assembly.

Removing and installing components

25

Summary of Contents for Inspiron 7300 2n1 Black



































































Reviews:

No comments