manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Service Manual, Page: 17 / 66

Share
Download
Dell Inspiron 7300 2n1 Black Service Manual Download Page 17

Solid-state drive/Intel Optane

Removing the M.2 2230 solid-state drive

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

base cover

.

About this task

NOTE:

 This procedure applies only to computers shipped with a M.2 2230 solid-state drive installed.

NOTE:

 The M.2 card installed on your computer will depend on the configuration ordered. Supported card

configurations on the M.2 card slot:

• M.2 2230 solid-state drive + 2230 mounting bracket
• M.2 2280 solid-state drive
• M.2 2280 Intel Optane Memory H10

The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the removal
procedure.

Steps

1. Remove the screw (M2x2) that secures the M.2 2230 mounting bracket to the system board.
2. Slide and remove the M.2 2230 mounting bracket off the system board.
3. Slide and remove the M.2 2230 solid-state drive off the system board.

Installing the M.2 2230 solid-state drive

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

Removing and installing components

17

Summary of Contents for Inspiron 7300 2n1 Black



































































Reviews:

No comments