Dell Inspiron 7000, Service Manual

Page: 44 / 105

Removing and Replacing Parts 4-9
)LJXUH5HOHDVLQJD=,)&RQQHFWRU
2. Pull up gently on the movable part of the connector until the cable is
released.
3. Grasp the cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, follow these steps:
1. Use the flat-blade screwdriver or dental pick to open the movable part of
the ZIF connector.
2. Orient the end of the cable with the ZIF connector, and insert the end of
the cable into the connector.
3. While holding the cable in place, close the ZIF connector.
To ensure a firm connection, make sure that the ZIF connector is completely
closed.