manualshive.com logo in svg

Dell Inspiron 5720, Owner'S Manual, Page: 84 / 113

Share
Download
Dell Inspiron 5720 Owner'S Manual Download Page 84

Figure 4. Curved edge

Testing memory using ePSA

1 

Turn on or restart your computer.

2 

Perform one of the following actions after the Dell logo is displayed:
•

With keyboard — Press F2.

The PreBoot System Assessment (PSA) starts on your computer.

NOTE: 

If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Turn off

 

the computer and try again.

Media-card reader

This computer has one SD card slot located on the left side of your computer.

Downloading the media-card reader driver

1 

Turn on your computer.

2 

Go to 

Dell.com/support

.

3 

Click 

Product Support

, enter the Service Tag of your computer and click 

Submit

.

NOTE: 

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4 

Click 

Drivers & downloads

.

5 

Click 

Find it myself

.

6 

Scroll down the page and expand 

Chipset

.

7 

Click 

Download 

to download the media-card reader driver for your computer.

8 

After the download is complete, navigate to the folder where you saved the media-card reader driver file.

9 

Double-click the card-reader driver file icon and follow the instructions on the screen.

Realtek HD audio drivers

Verify if the Realtek audio drivers are already installed in the computer.

84

Technology and components

Summary of Contents for Inspiron 5720


















































































































Reviews:

No comments