manualshive.com logo in svg

Dell Inspiron 5720, Owner'S Manual, Page: 65 / 113

Share
Download
Dell Inspiron 5720 Owner'S Manual Download Page 65

Installing middle frame

NOTE: 

The following steps are applicable only for non-touch systems. Touch configuration systems must have the whole LCD 

assembly replaced.

1 

Align the screw holes on the middle frame with the screw holes on the display panel.

2 

Replace the seven screws (M3X4) that secure the middle frame to the display panel.

3 

Align the screw holes on the middle frame with the screw holes on the speaker bezel.

4 

Replace the six screws (M2X3) that secure the middle frame to the speaker bezel.

5 

Open the latch and connect the display cable to its slot on the middle frame.

6 

Connect the backlight cable to its slot on the middle frame.

7 

Connect the converter-board cable to its slot on the middle frame.

8 

Install the:
a

display built-in self test button board.

b

system board.

c

camera.

d

media-card reader.

e

power-button board.

f

speakers.

g

converter board.

h

solid-state drive.

i

coin-cell battery

j

hard-drive cage

Removing and installing components

65

Summary of Contents for Inspiron 5720


















































































































Reviews:

No comments