Dell Inspiron 5720 Owner'S Manual Download Page 47

Page: 47 / 113

Installing HDD/SSD cage

Align the screw holes on the interposer with the screw holes on the drive cage.

Replace the four screws (M2X3) that connect the interposer to the drive cage.

Align the screw holes on the hard-drive cage to the screw holes on the middle frame.

Replace the four screws (M3X4) that secure the drive cage to the middle frame.

Connect the HDD/SSD cables and the HDD/SSD power cable to the system board.

NOTE:

Connect the blue-colored cable at the top and red-colored cable to the bottom of the drive cage.

Route the cables through the guide and close the clip to secure the cables.

Install the:
a

Follow the procedure in

After working inside your computer

Converter board

Removing converter board

Follow the procedure in

Before working inside your computer

Remove the:
a

Disconnect the left backlight power cable from the converter board [1].

Disconnect the converter-board cable from the converter board [2].

Disconnect the right backlight power cable from the converter board [3].

Removing and installing components

Summary of Contents for Inspiron 5720


















































































































Search results

Summary of Contents for Inspiron 5720

Reviews:

Dell Inspiron 5720, Owner'S Manual, Page: 47 / 113

Search results

Summary of Contents for Inspiron 5720

Reviews: