manualshive.com logo in svg

Dell Inspiron 5720, Owner'S Manual, Page: 23 / 113

Share
Download
Dell Inspiron 5720 Owner'S Manual Download Page 23

c

system-board shield

3 

In sequential order (indicated on the heat sink), loosen the captive screws that secure the processor heat-sink to the system board.

4 

Remove the screw (M3X4) that secures the processor heat-sink fan to the middle frame.

5 

Lift the processor heat-sink off the system board.

Installing processor heatsink

1 

Align the captive screws on the processor heat-sink with the screw holes on the system board.

2 

In sequential order (indicated on the processor heat-sink), tighten the captive screws that secure the processor heat-sink to the 
system board.

3 

Replace the screw (M3X4) that secures the processor heat-sink fan to the middle frame.

4 

Install the:
a

system-board shield

b

back cover

c

USB dongle-bay cover

5 

Follow the procedure in 

After working inside your computer

Processor

Removing processor

1 

Follow the procedure in 

Before working inside your computer

.

2 

Remove the:
a

USB dongle-bay cover

b

back cover

c

system-board shield

d

processor heatsink

3 

Press the release-lever down and then pull it outwards to release it from the securing tab [1].

4 

Extend the release-lever completely to open the processor cover [2].

5 

Gently lift the processor and remove it from the processor socket [3].

Removing and installing components

23

Summary of Contents for Inspiron 5720


















































































































Reviews:

No comments