manualshive.com logo in svg

Dell Inspiron 5590, Owner'S Manual

Share
Download
Dell Inspiron 5590 Owner'S Manual Download Page 12

Component

M2.0x3.0

M2.5x3.5

M2.5x5.0

M2.0x2.5

M2x3.0 

(OD4.5)

M2x5

Hinge

6

Display panel

4

Hard drive

4

WWAN

1

Subscriber Identity Module(SIM) board

Installing the Subscriber Identification Module card

1

Insert a paperclip or a Subscriber Identification Module (SIM) card removal tool into the pinhole [1].

2

Pull the SIM card tray to remove it [2].

3

Place the SIM on the SIM card tray.

4

Push the SIM card tray into the slot until it clicks into place. 

Removing the Subscriber Identification Module card

CAUTION: 

Removing the Subscriber Identification Module (SIM) card when the computer is on may cause data loss or damage 

the card. Ensure your computer is turned off or the network connections are disabled.

1

Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray.

2

Pull the SIM card tray to remove it.

3

Remove the SIM card from the SIM card tray.

4

Push the SIM card tray into the slot until it clicks into place.

12

Removing and installing components

Summary of Contents for Inspiron 5590




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands