Dell Inspiron 5580 Service Manual Download

Page: 40 / 76

Removing the I/O board

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Prerequisites

Remove the

base cover

Remove the

fan

Procedure

Peel the tape off the I/O-board connector.

Open the latch and disconnect the I/O-board cable from the I/O board.

NOTE:

If necessary, use a plastic scribe to open the latch.

Disconnect the fingerprint reader cable from the I/O board.

NOTE:

Applicable only to computers that are shipped with power button with fingerprint reader.

Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.

Lift the I/O board off the palm-rest and keyboard assembly.

Removing the I/O board

Summary of Contents for Inspiron 5580













































































Search results

Summary of Contents for Inspiron 5580

Reviews:

Related manuals for Inspiron 5580

Brands by name

Popular brands

Dell Inspiron 5580, Service Manual

Search results

Summary of Contents for Inspiron 5580

Reviews:

Related manuals for Inspiron 5580

Brands by name

Popular brands