Steps
1. Align and place the sensor board on the display back cover.
2. Connect the LED cable to the connector on the sensor board and close the latch.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
5. Install the
.
6. Install the
.
7. Install the
8. Install the
.
9. Exit
.
After working inside your computer
.
Display hinges
Removing the display hinges
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
8. Remove the
.
9. Remove the
10. Remove the
.
88
Removing and installing components
Summary of Contents for Inspiron 5521
