Dell Inspiron 5482 Service Manual Download Page 81

Page: 81 / 87

Table 11. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

Asset Tag

Create a system Asset Tag.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

Data Wipe

Enable to securely erase data from all internal storage devices.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a recovery
file on the user primary hard drive or an external USB key.

First Power On Date

Sets ownership date.

Table 12. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Thermal Events

Display the Thermal events.

Power Events

Display the Power events.

Table 13. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and for
the Dell OS Recovery tool.

SupportAssist OS Recovery

Enable or disable the boot flow for the SupportAssist OS Recovery tool when certain
system errors.

Identifier

GUID-CA599AD5-9996-4BE8-9643-1C626DB94E2D

Status

Released

Clearing CMOS settings

CAUTION:

Clearing CMOS settings will reset the BIOS settings on your computer.

Remove the

base cover

Disconnect the battery cable from the system board.

Remove the

coin-cell battery

Wait for one minute.

Replace the

coin-cell battery

Connect the battery cable to the system board.

Replace the

base cover

Identifier

GUID-5941E06E-ABCB-4468-ACE5-D51EF6AAA083

Status

Released

Clearing BIOS (System Setup) and System passwords

To clear the system or BIOS passwords, contact Dell technical support as described at

www.dell.com/contactdell

System setup

Summary of Contents for Inspiron 5482
























































































Search results

Summary of Contents for Inspiron 5482

Reviews:

Related manuals for Inspiron 5482

Brands by name

Popular brands

Dell Inspiron 5482, Service Manual

Search results

Summary of Contents for Inspiron 5482

Reviews:

Related manuals for Inspiron 5482

Brands by name

Popular brands