Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
●
Phillips screwdriver #0
●
Phillips screwdriver #1
●
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Screw type
Quantity
Screw image
Base cover
Palm-rest and keyboard
assembly
M2x4
4
3-cell Battery
Palm-rest and keyboard
assembly
M2x5
4
4-cell Battery
Palm-rest and keyboard
assembly
M2x5
5
Solid-state drive
bracket
System board
M2x3
1
Fan
System board
M2x3
2
Display-assembly
hinges
Palm-rest and keyboard
assembly
M2x2
3
Power-adapter port
Palm-rest and keyboard
assembly
M2x3
1
I/O board
Palm-rest and keyboard
assembly
M2x3
2
2
8
Removing and installing components
