2. Remove the screw (M2x3) that secures the wireless-card bracket to the system board.
3. Slide and remove the wireless-card bracket from the wireless card.
4. Using a plastic scribe, disconnect the antenna cables from the wireless card.
5. Slide and remove the wireless card from the wireless-card slot.
ការរដាទរកាតឥតដខសេ
ចំណាំ
មុននឹងលធ្វប្ការលៅខាងក្នុងកុំរ្យទទ័រររស់អ្នក
សូមអានរ័ត៌មានសុែត្ថិភារដែលមកពាមួយនឹងកុំរ្យទទ័រររស់អ្នក
និងអនុែតតាតាមជំហាននានាលៅក្នុង
មុននឹងលធ្វប្ការលៅខាងក្នុងកុំរ្យទទ័រររស់អ្នក
រនាទារ់រីលធ្វប្ការលៅខាងក្នុងកុំរ្យទទ័រររស់អ្នក
សូមអនុែតតាតាមការដណនាំលៅក្នុង
សប្មារ់រ័តមានរដន្ថម
សតាីរីការអនុែតតាប្រករលោយសុែត្ថិភាររំលុត
សូមលមប្លលរហទំរ័រ
ការអនុែតតាតាមរទរញញាតតាិ
តាមរយៈ
www.dell.com/regulatory_compliance
។
Procedure
CAUTION:
To avoid damage to the wireless card, do not place any cables under it.
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
2. Slide and replace the wireless-card bracket on the wireless-card.
3. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-
card slot.
4. Replace the screw (M2x3) that secures the wireless-card bracket to the system board.
ការលោះ
និងែំលេប្ងសមាសភារនានា
23