Dell Inspiron 2500 Factory Service Manual Download Page 108

Page: 108 / 118

Removing and Replacing Parts : Dell Inspiron 2500 Systems

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed

battery.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an

unpainted metal surface on the computer.

Removing the LED Board

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the

hinge cover

3. Remove the two 4-mm screws.

4. Lift the LED board out of connector.

Replacing the LED Board

1. Align the two screw holes with the two mounting holes on the bottom case assembly, and press the board

into its connector.

2. Replace the two 4-mm screws.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (39 of 46)6/21/2004 12:45:37 AM

Summary of Contents for Inspiron 2500























































































































Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands

Dell Inspiron 2500, Factory Service Manual

Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands