Dell Inspiron 15 Gaming Service Manual Download Page 108

Page: 108 / 112

Flashing the BIOS

You may need to flash (update) the BIOS when an update is available or when
you replace the system board. To flash the BIOS:

Turn on your computer.

Go to

www.dell.com/support

Click

Product support

, enter the Service Tag of your computer, and then

click

Submit

NOTE: If you do not have the Service Tag, use the auto-detect
feature or manually browse for your computer model.

Click

Drivers & downloads

→

Find it myself

Select the operating system installed on your computer.

Scroll down the page and expand

BIOS

Click

Download

to download the latest version of the BIOS for your

computer.

After the download is complete, navigate to the folder where you saved

the BIOS update file.

Double-click the BIOS update file icon and follow the instructions on the

screen.

108

Summary of Contents for Inspiron 15 Gaming

















































































































Search results

Summary of Contents for Inspiron 15 Gaming

Reviews:

Related manuals for Inspiron 15 Gaming

Brands by name

Popular brands

Dell Inspiron 15 Gaming, Service Manual

Search results

Summary of Contents for Inspiron 15 Gaming

Reviews:

Related manuals for Inspiron 15 Gaming

Brands by name

Popular brands