Dell Inspiron 15-7558 Service Manual Download

Page: 31 / 85

Replacing the wireless card

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Procedure

CAUTION: To avoid damaging the wireless card, do not place any cables
under it.

Align the notch on the wireless card with the tab on the wireless-card slot.

Insert the wireless card at an angle into the wireless-card slot.

Align the screw hole on the wireless card with the screw hole on the I/O board.

Replace the screw that secures the wireless card to the I/O board.

Summary of Contents for Inspiron 15-7558






















































































Search results

Summary of Contents for Inspiron 15-7558

Reviews:

Related manuals for Inspiron 15-7558

Brands by name

Popular brands

Dell Inspiron 15-7558, Service Manual

Search results

Summary of Contents for Inspiron 15-7558

Reviews:

Related manuals for Inspiron 15-7558

Brands by name

Popular brands