manualshive.com logo in svg

Dell Inspiron 15 5000 Series, Service Manual

Share
Download
Dell Inspiron 15 5000 Series Service Manual Download Page 49

Removing the speakers

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Prerequisites

1 

Remove the 

base cover

.

2 

Remove the 

battery

.

Procedure

1 

Disconnect the speaker cable from the system board.

2 

Disconnect the power and volume-buttons board cable and the coin-cell battery 
cable from the I/O board.

3 

Note the cable routing and remove the power and volume-buttons board cable 
from the routing guides on the palm rest and keyboard assembly and the 
speaker.

4 

Note the cable routing and remove the speaker cable from the routing guides on 
the palm rest and keyboard assembly.

49

Summary of Contents for Inspiron 15 5000 Series


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands