Dell Inspiron 15 3525 Service Manual Download

Page: 51 / 97

Steps

1. Using the alignment posts, place the power button with fingerprint reader into its slot on the palm-rest and keyboard

assembly.

2. Replace the (M2x2) screw that secures the power button with fingerprint reader to the palm-rest and keyboard assembly.
3. Adhere the fingerprint reader Flexible Flat cable to the palm-rest and keyboard assembly.

NOTE:

Fold and align the fingerprint reader Flexible Flat cable to the mark at the right of the power button, and align

the white line on the Flexible Flat cable to the mark on the palm-rest and keyboard assembly.

4. Close the display hinge.
5. Replace the two (M2.5x5) screws that secure the display hinge to the palm-rest and keyboard assembly.

Next steps

1. Install the

2. Install the

3. Install the

4. Install the

5. Install the

6. Follow the procedure in

After working inside your computer

Display assembly

Removing the display assembly

Prerequisites

1. Follow the procedure in

Before working inside your computer

2. Remove the

SD card

3. Remove the

base cover

4. Remove the

wireless card

Removing and installing components

Summary of Contents for Inspiron 15 3525


































































































Search results

Summary of Contents for Inspiron 15 3525

Reviews:

Related manuals for Inspiron 15 3525

Brands by name

Popular brands

Dell Inspiron 15 3525, Service Manual

Search results

Summary of Contents for Inspiron 15 3525

Reviews:

Related manuals for Inspiron 15 3525

Brands by name

Popular brands