NOTE:
When replacing the 4-cell battery, use a plastic scribe to push downward into the bottom-left screw hole to
insert the battery rubber stopper into the slot on the new replacement 4-cell battery.
2. Connect the battery cable to the 4-cell battery.
3. Place the 4-cell battery along with the battery cable on the palm-rest and keyboard assembly.
4. Align the screw holes on the 4-cell battery to the screw holes on the palm-rest and keyboard assembly.
5. Replace the four screws (M2x3) to secure the 4-cell battery to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Install the
After working inside your computer
.
Memory module
Removing the memory module
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Removing and installing components
23
