Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly..
3. Connect the speaker cable to the connector on the system board .
Next steps
1. Install the
.
2. Exit
.
3. Install the
.
after working inside your computer
.
IO board
Removing the I/O board
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Enter
.
4. Remove the
.
About this task
The following images indicate the location of the I/O board and provides a visual representation of the removal procedure.
Removing and installing components
45
