Dell Inspiron 13 5000 Series 2-in-1 Service Manual Download Page 128

Page: 128 / 139

Operating System

The Inspiron 15-5568 is shipped with the Windows 10 factory installation.

Service Tag location

The service tag is a unique alphanumeric identifier that allows Dell service
technicians to identify the hardware components in your computer and
access warranty information.

Device drivers

Intel Dynamic Platform and Thermal Framework

In the Device Manager, check if the Intel Dynamic Platform and Thermal
Framework is installed. Install the driver updates from

www.dell.com/support

Intel Chipset Software Installation Utility

In the Device Manager, check if the chipset driver is installed. Install the Intel
chipset updates from

www.dell.com/support

128

Summary of Contents for Inspiron 13 5000 Series 2-in-1












































































































































Search results

Summary of Contents for Inspiron 13 5000 Series 2-in-1

Reviews:

Related manuals for Inspiron 13 5000 Series 2-in-1

Brands by name

Popular brands

Dell Inspiron 13 5000 Series 2-in-1, Service Manual

Search results

Summary of Contents for Inspiron 13 5000 Series 2-in-1

Reviews:

Related manuals for Inspiron 13 5000 Series 2-in-1

Brands by name

Popular brands