manualshive.com logo in svg

Dell Inspiron 1121, Service Manual, Page: 27 / 54

Share
Download
Dell Inspiron 1121 Service Manual Download Page 27

Great user manuals database on 

UserManuals.info

  

 

Replacing the Hard Drive  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the new hard drive from its packaging. 
Save the original packaging for storing or shipping the hard drive.  
 

 

  

3.

Place the hard drive in the hard-drive bracket.  
 

 

  

4.

Replace the four screws that secure the hard-drive bracket to the hard drive.  
 

 

  

5.

Place the hard-drive assembly in the computer base.  
 

 

  

6.

Using the pull-tab, slide the hard-drive assembly into the connector on the system board.  
 

 

  

7.

Replace the two screws that secure the hard-drive assembly to the computer base.  
 

 

  

8.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

9.

Replace the battery (see 

Replacing the Battery

).  

 

 

 

10.

Install the operating system for your computer, as needed. See "Restoring Your Operating System" in the 

Setup Guide

.  

 

 

  

11.

Install the drivers and utilities for your computer, as needed.  
 

Back to Contents Page

 

 

 

1 

hard-drive bracket 

2 

hard drive 

3 

screws (4) 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer. 

Summary of Contents for Inspiron 1121























































Reviews:

No comments