20
| Replacing
the
Hard
Drive
Replacing the Hard Drive
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: To avoid data loss, do not remove the hard drive while the computer is
in Sleep or On state.
CAUTION: Hard drives are extremely fragile. Exercise care when handling the
hard drive.
Procedure
1
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
2
Replace the screws that secure the hard-drive brackets to the hard drive.
3
Connect the interposer to the hard drive.
4
Align the screw holes on the hard-drive assembly with the screw holes on the
palm-rest assembly.
5
Replace the screws that secure the hard-drive assembly to the palm-rest assembly.
6
Connect the hard-drive cable to the system board.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Replace the base cover. See "Replacing the Base Cover" on page 11.
