Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Connect the camera cable to the camera.
2
Using the alignment post, place the camera on the display-back cover
and snap it into place.
3
Slide the display cable into its slot on the display-back cover and close
the latch to secure the cable.
4
Adhere the tape on the display-cable connector.
5
Adhere the tape to secure the display cable to the display panel.
6
Slide the sensor-board cable into its slot on the sensor board and close
the latch to secure the cable.
Post-requisites
1
2
3
.
4
.
5
.
84
Summary of Contents for Inspiron 11 3168
