Dell iDRAC7 User Manual Download Page 225

Page: 225 / 252

–p

<password>: password to access the network share

–l

<image_location>: image location on the network share; use double quotes around the location. See examples for

image file path in Configuring Remote File Share Using Web Interface section

–s

: display current status

NOTE: All characters including alphanumeric and special characters are allowed as part of user name, password,
and image_location except the following characters: ’ (single quote), “(double quote), ,(comma), < (less than), and
> (greater than).

Deploying Operating System Using Virtual Media

Before you deploy the operating system using Virtual Media, make sure that:

•

Virtual Media is in

Attached

state for the virtual drives to appear in the boot sequence.

•

If Virtual Media is in

Auto Attached

mode, the Virtual Media application must be launched before booting the

system.

•

Network share contains drivers and operating system bootable image file, in an industry standard format such

as .img or .iso.

To deploy an operating system using Virtual Media:

Do one of the following:

– Insert the operating system installation CD or DVD into the management station CD or DVD drive.
– Attach the operating system image.

Select the drive on the management station with the required image to map it.

Use one of the following methods to boot to the required device:

– Set the boot order to boot once from Virtual Floppy or Virtual CD/DVD/ISO using the iDRAC7 Web interface.
– Set the boot order through System Setup

→

System BIOS Settings by pressing <F2> during boot.

Reboot the managed system and follow the on-screen instructions to complete the deployment.

Summary of Contents for iDRAC7





























































































































































































































































Search results

Summary of Contents for iDRAC7

Reviews:

Brands by name

Popular brands

Dell iDRAC7, User Manual

Search results

Summary of Contents for iDRAC7

Reviews:

Brands by name

Popular brands