Dell IDRAC6, User Manual

Page: 99 / 472

Configuring iDRAC6 Enterprise Using the Web Interface
99
Table 5-9. General Properties
Property Description
User ID Contains one of 16 preset User ID numbers. This field
cannot be edited.
Enable User When Checked , indicates that the user’s access to
iDRAC6 is enabled. When Unchecked , user access
is disabled.
User Name Specifies an iDRAC6 user name with up to 16 characters.
Each user must have a unique user name.
NOTE:
User names on iDRAC6 cannot include the / (forward
slash) or . (period) characters and are case sensitive.
NOTE:
If the user name is changed, the new name will not
appear in the user interface until the next user login.
Change Password Enables the New Password and Confirm New Password
fields. When deselected, the user’s Password cannot be
changed.
New Password Enables editing iDRAC6 user’s password. Enter a
Password with up to 20 characters. The characters will
not display.
NOTE:
Special characters like < , > , and \ are not allowed
and are blocked while creating user passwords.
Confirm New Password Re-enter iDRAC6 user’s password to confirm.
Table 5-10. IPMI LAN Privilege
Property Description
Maximum LAN User
Privilege Granted Specifies the user’s maximum privilege on the IPMI LAN
channel to one of the following user groups:
None ,
Administrator , Operator , or User .
Enable Serial Over LAN Allows the user to use IPMI Serial Over LAN.
When
Checked , this privilege is enabled.