manualshive.com logo in svg

Dell IDRAC6, User Manual

Share
Download
Dell IDRAC6 User Manual Download Page 88

88

Configuring iDRAC6 Enterprise Using the Web Interface

 

Configuring iDRAC6 NIC

This section assumes that iDRAC6 has already been configured and is 
accessible on the network. See "Configure iDRAC6 Networking" for help with 
the initial iDRAC6 network configuration.

Configuring the Network,  IPMI and VLAN Settings

 

NOTE: 

You must have 

Configure iDRAC6

 privilege to perform the following steps.

 

NOTE: 

Most DHCP servers require a server to store a client identifier token in its 

reservations table. The client (iDRAC6, for example) must provide this token during 
DHCP negotiation. iDRAC6 supplies the client identifier option using a one-byte 
interface number (0) followed by a six-byte MAC address.

1

Click 

System

→

 

Remote Access

→

 

iDRAC6

. 

2

Click the 

Network/Security 

tab.

The 

Network 

screen appears.

3

Configure the Network, IPMI, and VLAN settings as needed. See 
Table 5-2, Table 5-3, and Table 5-4 for descriptions of the 

Network, IPMI

, 

and 

VLAN Settings

 options.

4

Click 

Apply

.

5

Click the appropriate button to continue.

 

Table 5-1.

User Privilege Behavior in Supported Browsers

Browser

Tab Behavior

Window Behavior

Microsoft Internet 
Explorer 6

Not applicable

New session

Microsoft IE7 and IE8

From latest session opened New session

Firefox 2 and Firefox 3

From latest session opened From latest session opened

Table 5-2.

Network Settings

Setting

Description

Network Interface Card Settings

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands