Dell IDRAC6 User Manual Download

Page: 86 / 472

Configuring iDRAC6 Enterprise Using the Web Interface

Accessing the Web Interface

To access iDRAC6 Web interface, perform the following steps:

Open a supported Web browser window.

In the

Address

field, enter

https://<

iDRAC6-IP-address

and

press <Enter>.

If the default HTTPS port number (port 443) has been changed, enter:

https://<

iDRAC6-IP-address>:<port-number

where

iDRAC6-IP-address

is the IP address for iDRAC6 and

port-number

is the HTTPS port number.

iDRAC6

window appears.

Logging In

You can log in as either an iDRAC6 user or as a Microsoft

Active Directory

user. The default user name and password are

root

and

calvin

, respectively.

You must have been granted

privilege by the administrator

to log in to iDRAC6.

To log in, perform the following steps:

In the

Username

field, enter one of the following:

•

Your iDRAC6 user name.

NOTE:

The user name for local users is

case sensitive

. Examples are root,

it_user, IT_user, or john_doe.

•

Your Active Directory user name.

You can use any of the following forms for Active Directory names:
<

domain

>\<

username

>, <

domain

>/<

username

>, or

user

>@<

domain

>. They are not case sensitive. Examples are

dell.com

john_doe

, or

[email protected]

. Alternatively,

you can enter the domain in the

Domain

field.

In the

Password

field, enter your iDRAC6 user password or Active

Directory user password. Passwords are case sensitive.

Click

or press <Enter>.

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Search results

Summary of Contents for IDRAC6

Reviews:

Related manuals for IDRAC6

Brands by name

Popular brands

Dell IDRAC6, User Manual

Search results

Summary of Contents for IDRAC6

Reviews:

Related manuals for IDRAC6

Brands by name

Popular brands