manualshive.com logo in svg

Dell IDRAC6, User Manual

Share
Download
Dell IDRAC6 User Manual Download Page 387

iDRAC6 Enterprise Property Database Group and Object Definitions

387

cfgLanNetworking

This group contains parameters to configure iDRAC6 NIC.

One instance of the group is allowed. All objects in this group will require 
iDRAC6 NIC to be reset, which may cause a brief loss in connectivity. Objects 
that change iDRAC6 NIC IP address settings will close all active user sessions 
and require users to reconnect using the updated IP address settings.

 

NOTE: 

For any network property changes on iDRAC6 to be successfully executed 

through RACADM, you must first enable iDRAC6 NIC.

cfgNicIPv4Enable (Read/Write)

 

NOTE: 

cfgNicIPv4Enable (Read/Write)

 is not available with OpenManage version 

6.1 release. Support will be added in OpenManage version 6.2 release.

Legal Values

1 (TRUE)

0 (FALSE)

Default

1

Description

Enables or disables iDRAC6 IPv4 stack.

cfgDNSDomainNameFromDHCP (Read/Write)

Legal Values

1 (TRUE)

0 (FALSE)

Default

0

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands