manualshive.com logo in svg

Dell IDRAC6, User Manual

The Dell IDRAC6 is a powerful remote access controller that allows users to manage and monitor Dell servers from anywhere. Gain complete control over your server through a convenient interface. Download the user manual for free from manualshive.com and unlock the full potential of this exceptional product.

Share
Download
background image

RACADM Subcommand Overview

335

RACADM Subcommand Overview

This section provides descriptions of the subcommands that are available in 
the RACADM command line interface.

 

CAUTION: 

The latest iDRAC6 firmware supports only the latest RACADM version. 

You may encounter errors if you use an older version of RACADM to query iDRAC6 
with the latest firmware. Install the RACADM version shipped with your latest 
Dell™ OpenManage™ DVD media.

 

CAUTION: 

Some RACADM commands described in this chapter are not available 

with OpenManage™ version 6.1 release. Support will be added in OpenManage 
version 6.2 release.

 

help

Table A-1 describes the 

help

 command.

Synopsis

racadm help

racadm help <

subcommand

>

Description

The 

help

 subcommand lists all of the subcommands that are available when 

using the 

racadm 

command along with a one-line description. You may also 

enter a subcommand after 

help

 to get the syntax for a specific subcommand.

Table A-1.

Help Command

Command

Definition

help

Lists all of the subcommands available to use with 

racadm

 and provides a short description for each.

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IDRAC6

FrSky Taranis Q X7S Manual preview
Taranis Q X7S
Brand: FrSky Pages: 2
eclisse E-MOTION Installation, Operation And Maintenance Manual preview
E-MOTION
Brand: eclisse Pages: 40
Sonos Controller CR100 Quick Setup Instructions Manual preview
Controller CR100
Brand: Sonos Pages: 12
Westlock DIGITAL EPIC-2 DTM User Manual preview
DIGITAL EPIC-2 DTM
Brand: Westlock Pages: 33
KORINS EPIP-40 /30A(I) Instruction Manual preview
EPIP-40 /30A(I)
Brand: KORINS Pages: 3
SAES NEG POWER User Manual preview
NEG POWER
Brand: SAES Pages: 36
Renishaw PHC10-3 PLUS Installation Manual preview
PHC10-3 PLUS
Brand: Renishaw Pages: 68
Arduino ABX00047 Product Reference Manual preview
ABX00047
Brand: Arduino Pages: 18
BLAU aquaristic Lumina LED Quick Manual preview
Lumina LED
Brand: BLAU aquaristic Pages: 5
Rain Evo 1 Instructions Manual preview
Evo 1
Brand: Rain Pages: 8
Autopilot ECLIPSE F90 User Manual preview
ECLIPSE F90
Brand: Autopilot Pages: 12
Embedded Systems LogicMachine Reactor Lite Quick Start Manual preview
LogicMachine Reactor Lite
Brand: Embedded Systems Pages: 7
second sound ACO160 Quick Start Manual preview
ACO160
Brand: second sound Pages: 4
Texmate Tiger 320 DI-503E Manual preview
Tiger 320 DI-503E
Brand: Texmate Pages: 44
SMSC USB2250 Datasheet preview
USB2250
Brand: SMSC Pages: 35
ViziT KTM602R Operating Instructions Manual preview
KTM602R
Brand: ViziT Pages: 6
Progres Agronic 7000 Installation Manual preview
Agronic 7000
Brand: Progres Pages: 2
Avid Technology Artist Transport User Manual preview
Artist Transport
Brand: Avid Technology Pages: 43

Brands by name

Popular brands

Load more brands