Dell IDRAC6, User Manual

Page: 247 / 472

Using the RACADM Command Line Interface
247
Log in to the managed server, start a command shell, and enter local
RACADM commands in one of the following formats:
•
racadm <subcommand> [parameters]
•
racadm <getconfig|config> [-g <group>] [-o
<object> <value>]
Without options, the RACADM command displays general use information.
To display the RACADM subcommand list, enter:
racadm help
or
racadm getconfig -h
The subcommand list includes all RACADM commands that are supported
by iDRAC6.
To get help for a subcommand, enter:
racadm help < subcommand
>
The command displays the syntax and command-line options for the
subcommand.
Using the RACADM Utility to Configure iDRAC6
This section describes how to use RACADM to perform various iDRAC6
configuration tasks.
Displaying Current iDRAC6 Settings
The RACADM getconfig subcommand retrieves current configuration
settings from iDRAC6. The configuration values are organized into
groups
containing one or more
objects
, and the objects have
values
.
See "iDRAC6 Enterprise Property Database Group and Object Definitions"
for a complete description of the groups and objects.
To display a list of all iDRAC6 groups, enter this command:
racadm getconfig -h
To display the objects and values for a particular group, enter this command:
racadm getconfig -g
<
group
>