manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 75 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 75

Scheduling automatic backup server profile using web interface

To schedule automatic backup server profile:

1.

In the iDRAC Web interface, go to 

Overview

 → 

iDRAC Settings

 → 

Server Profile

.

The 

Backup and Export Server Profile

 page is displayed.

2.

Click the 

Automatic Backup

 tab.

3.

Select the 

Enable Automatic Backup

 option.

4.

Select one of the following to save the backup file image:
•

Network

 to save the backup file image on a CIFS or NFS share.

•

vFlash

 to save the backup file image on the vFlash card.

5.

Enter the backup file name and encryption passphrase (optional).

6.

If 

Network

 is selected as the file location, enter the network settings.

NOTE: While specifying the network share settings, it is recommended to avoid special characters for user name 
and password or percent encode the special characters.

For information about the fields, see the 

iDRAC Online Help

7.

In the 

Backup Window Schedule

 section, specify the backup operation start time and frequency of the operation (daily, 

weekly, or monthly).
For information about the fields, see the 

iDRAC Online Help

.

8.

Click 

Schedule Backup

.

A recurring job is represented in the job queue with a start date and time of the next scheduled backup operation. Five minutes 
after the first instance of the recurring job starts, the job for the next time period is created. The backup server profile 
operation is performed at the scheduled date and time.

Scheduling automatic backup server profile using RACADM

To enable automatic backup use the command:

racadm set lifecyclecontroller.lcattributes.autobackup Enabled

To schedule a backup server profile operation:

racadm systemconfig backup –f <filename> <target> [-n <passphrase>] -time <hh:mm> -dom 

<1-28,L,’*’> -dow<*,Sun-Sat> -wom <1-4, L,’*’> -rp  <1-366>-mb <Max Backups>

To view the current backup schedule:

racadm systemconfig getbackupscheduler

To disable automatic backup use the command:

racadm set LifeCycleController.lcattributes.autobackup Disabled

To clear the backup schedule:

racadm systemconfig clearbackupscheduler

For more information, see the 

iDRAC RACADM Command Line Interface Reference Guide

 available at 

dell.com/idracmanuals

.

Importing server profile

You can use the backup image file to import or restore the configuration and firmware for the same server without rebooting the 
server.

Import feature is not licensed.

75

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments