manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 253 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 253

where, y is an alpha-numeric character such as M (for blade servers), R (for rack servers), and T (for tower servers) and x is a 
number. This indicates the generation of Dell PowerEdge servers.

NOTE: Scripts using 

-$

 can use these for yx1x systems, but starting with yx2x systems one script with 

admin->

 can be 

used for blade, rack, and tower servers.

iDRAC SMCLP syntax

The iDRAC SMCLP uses the concept of verbs and targets to provide systems management capabilities through the CLI. The verb 
indicates the operation to perform, and the target determines the entity (or object) that runs the operation.

The SMCLP command line syntax:

<verb> [<options>] [<target>] [<properties>]

The following table provides the verbs and its definitions.

Table 39. SMCLP verbs

Verb

Definition

cd

Navigates through the MAP using the shell

set

Sets a property to a specific value

help

Displays help for a specific target

reset

Resets the target

show

Displays the target properties, verbs, and subtargets

start

Turns on a target

stop

Shuts down a target

exit

Exits from the SMCLP shell session

version

Displays the version attributes of a target

load

Moves a binary image to a specified target address from a URL

The following table provides a list of targets.

Table 40. SMCLP targets

Target

Definitions

admin1

admin domain

admin1/profiles1

Registered profiles in iDRAC

admin1/hdwr1

Hardware

admin1/system1

Managed system target

admin1/system1/capabilities1

Managed system SMASH collection capabilities

253

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments