manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 172 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 172

Power factor is the ratio of real power consumed to the apparent power. When power factor correction is enabled, the server 
consumes a small amount of power when the host is OFF. By default, power factor correction is enabled when the server is shipped 
from the factory.

Configuring power supply options using web interface

To configure the power supply options:

1.

In iDRAC Web interface, go to 

Overview

 → 

Server

 → 

Power/Thermal

 → 

Power Configuration

 → 

Power Configuration

. The 

Power Configuration

 page is displayed.

2.

Under 

Power Supply Options

, select the required options. For more information, see 

iDRAC Online Help

.

3.

Click 

Apply

. The power supply options are configured.

Configuring power supply options using RACADM

To configure the power supply options, use the following objects with the 

set

 command:

•

System.Power.RedundancyPolicy

•

System.Power.Hotspare.Enable

•

System.Power.Hotspare.PrimaryPSU

•

System.Power.PFC.Enable

For more information, see the 

iDRAC RACADM Command Line Interface Reference Guide 

available at 

dell.com/idracmanuals

.

Configuring power supply options using iDRAC settings utility

To configure the power supply options:

1.

In iDRAC Settings utility, go to 

Power Configuration

.

NOTE: The Power Configuration link is available only if the server power supply unit supports power monitoring.

The

 iDRAC Settings Power Configuration

 page is displayed.

2.

Under 

Power Supply Options

:

•

Enable or disable power supply redundancy.

•

Enable or disable hot spare.

•

Set the primary power supply unit.

•

Enable or disable power factor correction. For more information about the options, see the 

iDRAC Settings Utility Online 

Help

.

3.

Click 

Back

, click 

Finish

, and then click 

Yes

.

The power supply options are configured.

Enabling or disabling power button

To enable or disable the power button on the managed system:

1.

In iDRAC Settings utility, go to 

Front Panel Security

.

The

 iDRAC Settings Front Panel Security

 page is displayed.

2.

Select 

Enabled

 to enable the power button or 

Disabled

 to disable it.

3.

Click 

Back

, click 

Finish

, and then click 

Yes

.

The settings are saved.

172

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments