Steps
1. Place the computer in an upright position.
2. Connect the front-LED cable to the connector on the front cover.
3. Align the front-cover tabs with the slots on the chassis.
4. Rotate the front cover towards the chassis and snap it into place.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
3.5-inch hard drive
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
About this task
The following images indicate the location of the 3.5-inch hard-drive assembly and provides a visual representation of the removal
procedure.
Removing and installing components
13
