20
│
About your monitor
Electrical specifications
Description
Value
Video input signals
HDMI 2.0 (HDCP), 600 mV for each differential line,
100 ohm input impedance per differential pair.
DisplayPort 1.4, 600 mV for each differential line, 100
ohm input impedance per differential pair.
USB-C (with Alternate mode) signal input support.
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
(maximum)
Inrush current
120 V: 30 A (maximum) at 0°C (cold start)
240 V: 60 A (maximum) at 0°C (cold start)
Power consumption
0.3 W (Off mode)
1
0.4 W (Standby Mode)
1
33 W (On Mode)
1
97 W (Maximum)
2
33 W (P
on
)
3
104 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Maximum brightness and contrast setting.
3
P
on
: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
devices you ordered and shall have no obligation to update such information.
The customer should not rely upon this information in making decisions about
electrical tolerances or otherwise. No warranty as to accuracy or completeness is
expressed or implied.
