Touchpad
Removing the touchpad
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
solid-state drive in M.2 slot one
6. Remove the
solid-state drive in M.2 slot two
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
.
13. Remove the
NOTE:
The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
Steps
1. Remove the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
2. Lift the touchpad bracket off the palm-rest and keyboard assembly.
3. Peel off the tape from the touchpad.
4. Remove the four (M2x2) screws that secure the touchpad to the palm-rest and keyboard assembly.
5. Lift the touchpad off the palm-rest and keyboard assembly.
54
Removing and installing components
