manualshive.com logo in svg

Dell G2422HS, User Manual

Share
Download
Dell G2422HS User Manual Download Page 52

52 

│

  Troubleshooting

Troubleshooting

WARNING: Before you begin any of the procedures in this section, 
follow the 

Safety instructions

.

Self-test

Your monitor provides a self-test feature that allows you to check whether your 
monitor is functioning properly. If your monitor and computer are properly 
connected but the monitor screen remains dark, run the monitor self-test by 
performing the following steps:

1.

Turn off both your computer and the monitor.

2.

To ensure proper self-test operation, remove all cables from the back of 
computer

3.

Turn on the monitor.

NOTE: A dialog box should appear on-screen (against a black 
background), if the monitor cannot sense a video signal and is working 
correctly. While in the self-test mode, the power LED lights white 
(default color). 

NOTE: The message may slightly differ, depending on the connected 
input signal.

4.

This box also appears during normal system operation, if the video cable 
becomes disconnected or damaged.

5.

Turn off your monitor and reconnect the video cable; then turn on both your 
computer and the monitor.

If your monitor screen remains blank after you perform the previous procedure, 
check your video controller and computer, because your monitor is functioning 
properly.

Summary of Contents for G2422HS




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands