AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
17
Installing the Navisphere Server Utility
Installing the Navisphere Server Utility
Read this section for all configurations.
You
must
run
the Navisphere Server Utility on each server connected
to the storage system to register the server’s HBAs with the storage
system. We recommend that you install it on each server also. If your
AX-Series Server Support
CD is version 1.1 or higher, you must install
it if you want the server to access snapshots (copies of virtual disks)
on the storage system.
Before You Start
To complete this procedure, you need the
AX-Series Server Support
CD
that shipped with the storage system.
Install the Server Utility
1. Insert the
AX-Series Server Support CD
into the server’s CD drive,
if it is not already inserted.
2. Log in to the server as superuser (root).
3. Start the installation program:
cd /cdrom/cdrom0
pkgadd -d HOSTUTLA.pkg
4. At the prompt to select the packages to process, enter
1
to select
HOSTUTLA
.
5. At the prompt about scripts that execute with super-user
permission during the installation, enter
y
.
The screen displays information about the installation.
6. When installation is complete, exit the
/cdrom
directory (for
example, execute
cd /
), and then remove the CD from the host’s
CD drive.
7. Remove the CD from the CD drive.