Dell EMC VxFlex Ready Node, User Manual

Page: 234 / 354

l
All other objects—the object’s ID
Note: A name must be assigned to a volume when it is initially created. You can
rename the volume later, using the Rename command.
Procedure
1. Depending on the object type, in the Backend
>
Storage or any of the
Frontend views, navigate to the object in the table, and select its row.
2. Right-click the object and select Rename.
An editing window is displayed, showing the current name, and an editable field
for the new name.
3. Type the new name in the field, and click OK.
Approving pending security certificates
Approve pending security certificates, and view approved certificates in the System
Settings window.
About this task
Note: When there are pending certificates in the system, they are listed in the
Backend > Storage view > State Summary table, and in the Monitor > Alerts
view.
Procedure
1. From the System Settings menu in the top right corner, select System
Settings.
The System Settings window appears, showing approved and pending
certificates.
2. Scroll to connections that are Pending Approval, and expand the rows.
3. For each one, scroll to the bottom of the information about the required
certificate, and click Confirm.
Customizing system preferences
About this task
You can customize various features in the VxFlex OS GUI using the User Preferences
window. The following features can be customized:
l
Refresh data rate
l
Clear host history from previous sessions
l
Calculation of I/O workload average rate shown on the Dashboard
l
System clock display
l
Advanced display mode for Dashboard, Backend internal views, Frontend internal
views, and Property Sheet
l
Log level
Procedure
1. From any location in the VxFlex OS GUI, open the System Settings menu in
the top right corner, and select User Preferences.
The User Preferences window is displayed.
Configuring the System using the VxFlex OS GUI
234 Dell EMC VxFlex Ready Node AMS User Guide