Dell EMC VxFlex Ready Node, User Manual

Page: 171 / 354

Table 31 Local and LDAP user roles and permissions (continued)
User role Query Configure parameters
Configure user
credentials
Local LDAP Local LDAP Local LDAP
Configurator (this role is
only applicable for local
users) Yes Not
applicabl
e Yes
(an
aggregation of
both Frontend
and Backend
Configurator) Not
applicable No Not
applicabl
e
Backend Configurator Yes No Yes
Backend operations only
(Protection Domains,
Storage Pools, Fault Sets,
SDSs, Devices, other
system settings) No No
Frontend Configurator Yes No Yes
Frontend operations only
(Volumes, SDCs,
Snapshots) No No
Administrator Yes No Yes No May configure
Configurator and
Monitor users
Security Roles No No No No May define
Administrator
users and control
LDAP
Super User
(only one Super User is
allowed per system, and
it must be a local user) Yes Not
applicabl
e Yes Not
applicable Yes Not
applicabl
e
Authenticating with the management server
To access the CLI, you must first log in, using a terminal application. Once logged in,
you can set the user authentication method.
If the CLI and the AMS do not reside on the same server, add the
--mdm_ip
parameter, the IP address of the AMS server, to all CLI commands. For example:
scli --mdm_ip 10.10.10.3 --login --username admin
You will be prompted to enter the password.
For AMS login, the password is created during the installation of the AMS.
Security Management
Dell EMC VxFlex Ready Node AMS User Guide 171