Dell EMC VxFlex Ready Node Installation Manual Download Page 86

Page: 86 / 92

Procedure

Align the screws with the designated U spaces on the front and rear rack flanges.

Note:

Ensure that the screw holes on the tab of the system retention bracket are seated on the designated U

spaces.

Insert and tighten the two screws using the Phillips #2 screwdriver to secure the rails to the cabinet.

Figure 43 Installing screws

Install the front bezel

Use this procedure to install the front bezel on the server.

Procedure

Align and insert the right end of the bezel onto the system.

Press the release button and fit the left end of the bezel onto the system.

Lock the bezel by using the key.

R840 Equipment Installation

Dell EMC VxFlex Ready Node Server Installation Guide

Summary of Contents for EMC VxFlex Ready Node





























































































Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands

Dell EMC VxFlex Ready Node, Installation Manual

Search results

Summary of Contents for EMC VxFlex Ready Node

Reviews:

Related manuals for EMC VxFlex Ready Node

Brands by name

Popular brands