Dell EMC VMAX 250F Site Planning Manual Download Page 14

Page: 14 / 132

Revision history

Table 2 Revision history

Revision

Description and/or change

Date
released

8.2

Fixed typo for single-phase PDP wiring configuration.

August, 2017

8.1

Added recommendation for chassis to chassis grounding for
multiple bay systems.

June, 2017

8.0

Added VMAX 950F product content.

May, 2017

7.0

Updated power and heat dissipation numbers for VMAX 250F.
Corrected formula for 3rd party rack cabinet width
requirements.

September,
2016

6.0

Added VMAX 250F product content and adjusted document
architecture for readability.
Updated wiring configuration diagrams and content for new
2U PDUs.

Updated power distribution unit recommendations for
overhead power.

August, 2016

5.0

In Position Bays chapter, removed an incorrect image.

June, 2016

4.0

Added content to support option for 3rd-party racks.

May, 2016

3.0

Modified topics to reflect Slot 9 is reserved for compression.

April, 2016

2.0

Updated values in the power and heat dissipation specification
table.

February,
2016

1.0

First release of the VMAX All Flash with EMC HYPERMAX OS
for VMAX 450F, VMAX 450FX, VMAX 850F, and
VMAX 850FX.

February,
2016

Preface

Site Planning Guide

VMAX 250F, VMAX 450F, VMAX 850F, VMAX 950F with HYPERMAX OS

Summary of Contents for EMC VMAX 250F





































































































































Search results

Summary of Contents for EMC VMAX 250F

Reviews:

Related manuals for EMC VMAX 250F

Brands by name

Popular brands

Dell EMC VMAX 250F, Site Planning Manual

Search results

Summary of Contents for EMC VMAX 250F

Reviews:

Related manuals for EMC VMAX 250F

Brands by name

Popular brands