●
Restore the service tag, license, and diagnostics information, press
Y
●
Navigate to the Lifecycle Controller based restore options, press
N
●
Restore data from a previously created
Hardware Server Profile
, press
F10
NOTE:
When the restore process is complete, BIOS prompts to restore the system configuration data.
●
Restore data from a previously created
Hardware Server Profile
, press
F10
●
To restore the system configuration data, press
Y
●
To use the default configuration settings, press
N
●
NOTE:
After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using
System
Setup
.
About this task
If you know the system service tag, use the
System Setup
menu to enter the service tag.
Steps
1. Power on the system.
2. To enter the
System Setup
, press
F2
.
3. Click
Service Tag Settings
.
4. Enter the service tag.
NOTE:
You can enter the service tag only when the
Service Tag
field is empty. Ensure that you enter the correct
service tag. Once the service tag is entered, it cannot be updated or changed.
5. Click
OK
.
Trusted Platform Module
This is a service technician replaceable part only.
Upgrading the Trusted Platform Module
Removing the TPM
Prerequisites
NOTE:
●
Ensure the operating system is compatible with the TPM version you are installing.
●
Ensure that you download and install the latest BIOS firmware on your system.
●
Ensure that the BIOS is configured to enable UEFI boot mode.
CAUTION:
The TPM plug-in module is cryptographically bound to that particular system board after it is
installed. When the system is powered on, any attempt to remove an installed TPM plug-in module breaks the
cryptographic binding, and the removed TPM cannot be installed on another system board. Ensure any keys you
have stored on the TPM have been securely transferred.
Steps
1. Locate the TPM connector on the system board. For more information, see
.
2. Press to hold the module down and remove the screw using the security Torx 8-bit shipped with the TPM module.
3. Slide the TPM module out from its connector.
Installieren und Entfernen von Systemkomponenten
97
